Loading... Please wait...SASHCO SYMPHONY
When applied to bare wood, Symphony™ enhances the natural grain of your logs by creating the illusion of depth. Its clear, non-yellowing formula allows the natural color of wood to shine through. It's water-based, completely VOC compliant, has no offensive odor and can be easily applied by spray. Symphony™, gloss or satin, is the beautiful way to protect the natural elegance of interior logs.
SPECIFICATIONS:
Coverage rate: The first coat will cover 200-300 sq. ft/gal (18-28 sq. m/gal). Average coverage rate
after first coat is 400-500 sq. ft/gal (37-46 sq. m/gal). Porous woods will result in
reduced coverage.
Do not dilute. Stir thoroughly before using. Do not shake as this will cause foaming.
Application: For best results, apply Symphony with a high-quality synthetic bristle brush. It may
also be applied with a foam brush, pad applicator or spray applicator. Back brushing
after spraying will enhance penetration into the wood surface. Brush material in the
direction of the grain. Do not over-brush (bubbles can form). Sand between coats for
a smoother finish.
Apply two or more coats—additional coats will give a more durable finish, with higher
gloss and more depth.
Symphony will dry to touch in one hour and can be sanded after two hours (when the
air is warm & dry). Recoating can be done after 1-2 hours. Allow wood that will be
handled to dry overnight before using. Actual dry time depends on thickness of coats,
temperature and humidity.
Apply when 50°-90°F. Best results are obtained at 60°-90°F. Avoid applying in cold
drafts or areas with no overhead roofs.
VOCs: Less than 350 grams/liter
Shelf Life: 18 mnths from date of manufacture.
Clean up: Clean equipment and hands with soap and water. Spray equipment should be cleaned
with water followed by cleaning with paint thinner. Use paint thinner to clean dried
material.
Solids: 23%