HIGH SIERRA STAIN     (color chart below)

High Sierra Log Stain was formulated for ease of application without sacrificing beauty or performance. It really is easy to apply. The 2-coat system has a longer working time so that lap marks are practically eliminated and the second coat evens out inconsistencies that may have occurred on the application of the first coat. It can even be applied at cooler temperatures, surface temperatures as low as 40 degrees F.

Although performance is paramount, let's not forget beauty. High Sierra has a color pallet of 10 choices, from rich, warm browns, to natural, honey colors. The high quality trans-oxide pigments enhance the beauty of the grain while protecting the wood. The finish is stunning, durable, and will look like it was applied by professionals.

High Sierra Stain can be used on both exterior and interior wood surfaces.


SPECIFICATIONS:
Coverage rate:             The first coat of High Sierra Log Stain will cover 150 – 300 square feet per gallon, depending on the wood
                                    roughness. The second coat, applied within 30 min. to 2 hours after the first coat, will cover 250-450 square
                                    feet per gallon.

Application:                 Surface temperature: 40°F minimum and rising, 95°F maximum and falling. For best performance, apply
                                   between 60°F and 90°F. The coating should be applied and allowed to dry within this temperature range.
                                   Application and curing below the minimum risks freezing and slow drying which could lead to rain or snow
                                   damage. Application above the recommended maximum risks drying too fast, with poor penetration into the
                                   wood.

Dry Time:                    High Sierra typically dries to the touch within 30 minutes to 2 hours, depending on the condition of the wood
                                   surface and the weather. The first coat should be allowed to dry until tack free before the second coat is
                                   applied.

VOCs:                        Less than 350 grams/liter
Shelf Life:                   18 months from date of manufacture (minimum), when stored at room temperature.
Solids:                        Approximately 22% by volume (varying slightly, color to color)
Odor:                         Very mild, slight ammonia odor


High Sierra Log Stain Color Chart:

Applewood Natural Spruce Butternut Bronze Sycamore Tan Pine

Honey Timber Natural Cedar Woodtone Cedar Redwood Pecan

** These color samples are only an approximation. The colors may vary substantially based on your monitor calibration. The colors may also vary substantially based on species, texture and porosity of wood, and application technique. Therefore, we strongly recommend that you request color samples of the color range that you are targeting.