SASHCO CAPTURE LOG STAIN

Capture Log Stain is the pigmented part of a two-part system: An extremely effective, attractive stain followed by a clear, weather-repellent topcoat called Cascade.  Capture Log Stain can be used on interior wood surfaces however use Sashco's Symphony as the top coat for an interior application.

Nature is beautiful - but harsh. So Capture Log Stain is specifically designed to protect your home no matter what the weather condition or elevation. Capture Log Stain's unequaled formula allows the coating to move freely as your logs inevitably expand and contract (as moisture escapes and temperatures change). Which means no pealing, flaking or chalking-just a beautiful coating that really lasts!
It's truly remarkable and unheard of until now - an elastic coating that stretches with log movement. This flexibility permits the bridging of small cracks in the surface of wood and provides an elastic shield for the underlying wood. Virtually no other coating provides this level of elasticity. Loaded with UV absorbers, Sashco's Capture protects your home from the damaging effects of the sun's ultraviolet rays. Capture Log Stain glides on and clean up is easy with just soap and water.

If you select any of the lighter colors of Capture Log Stain (Almond Bark, Natural, Wheat, or Bronze Pine) for best durability, we recommend two heavily applied coats, followed by one coat of Cascade. One coat of Capture Log Stain can perform very well if it is sprayed heavily and then immediately and vigorously back-brushed.

Cascade provides added exterior protection against damaging UV rays. It dries with a modest sheen and adds depth to the appearance of stained logs.

SPECIFICATIONS:
Coverage rate:             One gallon covers 200-300 sq. ft. on smooth surfaces and approximately 150 sq. ft. per
                                    gallon on rough surfaces.

Application:                 Surface temperature should be 40°F minimum and rising, 90°F maximum and falling.
                                   The coating should be applied and allowed to dry within this temperature range.
                                   Application and curing below the minimum risks slow drying which could lead to rain or
                                   snow damage. Application above the recommended maximum risks drying too fast, with
                                   poor penetration into the wood.  Best Performance occurs between 60°F and 90°F.
                                   Note: When cold and/or humid nights are expected, apply coatings no later than mid-
                                   afternoon to allow adequate drying before exposure to severe conditions

Dry Time:                    Capture Log Stain dries to touch in 30 minutes (or less) in ideal weather, but the nature
                                   of the coating is that it will retain a slight tackiness until you top-coat with Cascade.
                                   (45° - 90°, 50% humidity or less.)

VOCs:                        Less than 250 grams/liter
Shelf Life:                   18 mnths from date of manufacture (minimum, unopened pail stored at room temperature)
Solids:                        28-33%
Odor:                         Mild, sweet

Capture Log Stain Color Chart:

Almond Bark Natural Wheat Bronze Pine Autumn Aspen

Hazelnut Sequoia Chestnut Glacier Gray Driftwood

** These color samples are only an approximation. The colors may vary substantially based on your monitor calibration. The colors may also vary substantially based on species, texture and porosity of wood, and application technique. Therefore, we strongly recommend that you request color samples of the color range that you are targeting.